How to Flash INFINIX SMART 3 Plus with Android 9 Pie | X627 Firmware MT6761

How to Flash INFINIX SMART 3 Plus with Android 9 Pie | X627 Firmware MT6761

Are you looking for a way to flash Infinix Smart 3 Plus X627? 

If yes, then you’re on the right post, you cannot just decide to flash your device for no reason, it is either your device is bricked, lagged or you are learning how to flash an Android phone.

In this context, I will explain in detail the instructions and important steps to take in downloading and flashing the Infinix Smart 3 Plus X627 official firmware.

Infinix Smart 3 Plus X627 is a MediaTek MT6761 Android phone that comes with an Android version 8.1.0 Oreo, you might encounter soft brick, hard brick, boot loop or other software related problems on this device model and would like to flash the phone with stock ROM to fix it.

Before we begin flashing Infinix Smart 3 Plus X627 there are important steps we need to take, the steps include, back up of important files, downloading and installing VCOM drivers, downloading firmware and the flash tool then lastly the flashing process itself, all of these steps are better explained below.

With the official ROM, you can get OTA Updates and another benefit the device manufacturing is giving to their users. 

Here you will find the latest Infinix firmware for Infinix Smart 3 Plus X627. If you are looking for Infinix Smart 3 Plus X627 stock ROM firmware, then you are on the right page you will found it in the bottom of page.

Before downloading, make sure your device is Infinix Smart Plus X627, if it is not, then flashing the below stock firmware can brick your device.

The Infinix Smart 3 Plus X627 firmware helps in unbricking the device, updating the device to latest android version, revert the device back to stock, fix boot loop issues and several other issues on your device.

Before you start to flash the Stock Firmware ROM, please make sure charged battery is required to be the process. We will not be responsible if anything goes wrong, Good luck.

INFINIX Smart 3 Plus Specification

infinix Smart 3 Plus smartphone runs on Android v9.0 (Pie) operating system. The phone is powered by Quad core, 2 GHz, Cortex A53 processor. It runs on the MediaTek Helio A22 Chipset. It has 2 GB RAM and 32 GB internal storage.

Infinix Smart 3 Plus smartphone has a IPS LCD display. It measures 157 mm x 76 mm x 7.8 mm and weighs 148 grams. The screen has a resolution of 720 x 1520 pixels and 271 ppi pixel density. It has an aspect ratio of 19.5:9 and screen-to-body ratio of 80.27 %. On camera front, the buyers get a 8 MP f/2.0 Primary Camera and on the rear, there's an 13 MP + 2 MP camera with features like Digital Zoom, Auto Flash, Face detection, Touch to focus. It is backed by a 3500 mAh battery. Connectivity features in the smartphone include WiFi, Bluetooth, GPS,

Why You Flash Infinix X627 Firmware ?

suddenly your Infinix X627 is crash with virus or hanging problem or bootloop,hang logo,restart problem then you need to flash firmware to fix your device. hard reset not working and doesn’t enter recovery or any kind of software issue then you need to must install stock firmware for repair you smart phone. a Smart Phone’s not working good properly without a good firmware. so android firmware program is a part of life smart phone

The Advantage of Stock Rom

• Flash Stock Rom To Unbrick your Infinix X627
• Flash Stock ROM to Fix the boot loop Problem
• Upgrade and Downgrade Infinix X627 Matching By Build Version
• Unroot or Fix Bugs on your phone
• To fix the lag or stutter on Infinix X627 By flashing Stock ROM, you can solve software problems
• Revert back to stock to gain your warranty.

INFINIX X627 MTK USB DRIVER

Flashing Before Any MTK Based Smart Phone On your PC. You Need to Install First Mediatek USB Driver Then Process Installing Firmware. Without Driver Your Smart Phone Will Not Detect Boot To Your Computer . So Download MTK USB Driver And Install Them Your PC

Download MTK USB Driver

Pre-Requisites

• A Windows PC
• A USB Cable
• You must have installed MTK USB drivers on your PC
• The Techno Flash Tool is for devices based on MediaTek chipsets. Do not use it on any other device.
• Charge the battery of your device well enough (above 50% recommended) before flashing ROM on it.
• Make sure to have the right firmware for your device.
• Check that the firmware folder has the scatter.txt file as it is important for the ROM flashing process.

How To Flash With Tecno Flash Tool

If you are stuck at FRP, Flashing will Remove FRP.

1- Download & Unzip Tecno Flash tool Folder. Run SWD_AfterSales.exe.

2- It will launch Tecno Flash Tool.

3- Click on Setting then on Load, Choose Firmware and Click on Confirm.

4- Click on Play. Switch off Phone & Connect it .

5- Flashing will Start.

INFINIX Smart 3 Plus X627 Flash File Download Stock Firmware 

This Infinix Smart Plus X627 Flash File will help you to upgrade, downgrade or reinstall the stock firmware (OS) on your mobile device. The Flash file (ROM) also helps you to repair the mobile device, if it is facing any software issue, Bootloop Issue, IMEI Issue, or Dead Issue0 Download the infinix firmware for the Infinix Smart Plus X627. The operating system of this firmware is Android.

Tecno_Flash_Tool_v4.1901.23.17.rar

X627-H624STXYZAa-P-190508V182_RepairMyMobile

================DISCLAIMER==================== 

 All videos on my YouTube channel are for Educational purpose only and/or to help people unlock their phones who forget their Password or Google Lock. I do not endorse or encourage unlocking of stolen/barred mobile phones. Anyone using these videos for any illegal or unlawful purpose will be solely responsible for his/her activity.