Samsung SM-J710F Firmware Binary 6 Started rolling the Mar 2020 new latest Android security patch with build number J710FXXU6CSG2. the updated Android 8.1 latest patch device in united kingdom. If you haven’t received the recent update version on your Galaxy J7 2016 Security U6 smartphone, then you can go manually to check the software update setting.
With this Samsung Galaxy J7 2016 (SM-J710F) flash file / Firmware / stock rom you can fix stuck at samsung or logo and bootloop, fix dead mobile, fix IMEI related issues, any type of software issue, and battery draining, removing google account, frp, and downgrade or upgrade, root, flash stock rom.
This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and fix other software faults on the device.
Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.
Before you can proceed to the process make sure that you do the things we will list below and that you read it carefully, this procedure works perfectly and tested by many users, so if you have doubt or questions about this post you can leave a comment below.
Warning!
Be extra cautious when you choose the firmware builds as flashing wrong firmware might result in a bricked device. Make sure whether you’re flashing a compatible firmware or not before starting the process. Flashing firmware may void your device warranty either temporarily or permanently. You alone are responsible for any consequences that might occur during the process. We shall not be held responsible for any damage to your device.
Info Rom
Model Name: Samsung Galaxy J7 2016 SM-J710F
Model Number: SM-J710F
Region: UK
Language: ENG
Operating System: Android 8.1 Oreo
Disclaimer
Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and thus you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
What is Flashing
There are so many meanings of the term Flashing, but whenever we called it Android Flashing, we indicate installing any Operating System or Recovery File on the exact Android phone model we are referring to.
- There are so many issues that would make you flash your Smartphone; either it can be a simple lag on your phone, it got stuck or bricked in the System boot loop or some other software issue.
- It really makes sense to flash Android while you get such locked issues on your phone, and it’s a legit process because even smartphone service centers do the same to get rid of these bricks.
- Now flashing process basically needs something called ROM, which is simply the modified version of Android.
- This ROM can either be a Stock one or a Custom one, which both are way different, as being the native or arbitrary respectively.
- The process goes as you download an Android ROM, either a Stock or Custom ROM, follow the prerequisites and then install the same ROM as the official kernel.
- It’d be way complex when trying the standard procedure and would appear simple when using a Odin tool.
In the below procedure, we’re going to employ a flashing tool named Odin Tool, the most suitable tool to flash Samsung Galaxy J7 2016 SM-J710F and any Android Smartphones there in the universe.
You would really enjoy the below process, but before that, let’s get to understand some privileges you’re gonna enjoy after flashing your phone.
What is Stock ROM
Stock ROM: Stock ROM is Original ROM/ Official Rom that your phone have. IF you buy a android phone. It have a Stock ROM. Stock ROM is default ROM.
Warranty: Stock ROM does not avoid your warranty. One of the reasons that android people don’t go for Custom ROMs is warranty. If you install custom ROM then your warranty is canceled on time.
Premium Apps: Premium apps is which you did not install apps. Normally stock ROMs come with unique premium apps to attract customers. These premium apps different from one mobile vendor to another vendor. These apps can be anything like music players, apps stores, widgets, Track-ID (Sony) , S voice (Samsung)
Security: in stock ROM, You can be sure that it does not contain/include any spywares, malwares, backdoor, trojan or other malicious tools.
Why I Want to Install Stock ROM
When phone does not on.
When phone does not pass “LOGO” Screen / boot image
When phone get “could not do normal boot Odin mode” error
When phone get “System errors”
If you think though your phone go crazy / Slow even after performing reset, then you can flash Stock Rom
When phone broke after rooting.
Samsung Galaxy J7 2016 SM-J710F Specifications
Samsung Galaxy J7 (2016) mobile was launched in March 2016. The phone comes with a 5.50-inch touchscreen display offering a resolution of 720x1080 pixels. Samsung Galaxy J7 (2016) is powered by a 1.6GHz octa-core processor. It comes with 2GB of RAM. The Samsung Galaxy J7 (2016) runs Android 6.0.1 and is powered by a 3300mAh removable battery.
As far as the cameras are concerned, the Samsung Galaxy J7 (2016) on the rear packs 13-megapixel camera. It sports a 5-megapixel camera on the front for selfies.
The Samsung Galaxy J7 (2016) runs TouchWiz UI is based on Android 6.0.1 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 128GB). The Samsung Galaxy J7 (2016) is a dual-SIM (GSM and GSM) mobile that accepts Micro-SIM and Micro-SIM cards. The Samsung Galaxy J7 (2016) measures 151.70 x 76.00 x 7.80mm (height x width x thickness) and weighs 170.00 grams. It was launched in Pink, White, and Gold colours.
Connectivity options on the Samsung Galaxy J7 (2016) include Wi-Fi 802.11 b/g/n, GPS, Bluetooth v4.10, USB OTG, Wi-Fi Direct, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, and proximity sensor.
Pre-Requisites
This will work on Samsung Galaxy J7 2016 SM-J710F Binary 6 (Don’t Try this on Any other device).
Charge your phone up to 80% or 70%.
Download the latest Samsung USB Drivers.
You will lose all you data. So make sure to Backup your phone before doing this step .
You can also backup all your Data.
Download all the Zip files from below.
Before Start Update Firmware
Backup Apps and SMS messages, Contacts, Google Data, WhatsApp Messages Pictures and Videos.
Make sure your Android device is charged up to 60-70% battery level.
USB drivers installed for the Samsung Galaxy.
make sure model number (SM-J710F).
Download the Custom firmware or rom file in download section Samsung Galaxy J7 2016 SM-J710F.
Benefits of Stock Firmware
Back To Stock: If you wish to go back to stock on your Samsung device, simply installing a firmware using Odin will do it. Whatever customization you had done will be gone, like custom recovery, custom kernel, root access, etc. The device becomes as good as new software-wise.
Update: Installing firmware with a newer Android version or build no. is the easiest way to update your Samsung Galaxy device manually, without waiting for the OTA update, or when OTA fails you.
Unbrick: If your Galaxy device is not starting properly and is stuck in the boot loop situation and thus rebooting after should the logo, then installing a firmware will fix that too. It serves as a good fix for soft-bricked devices.
Unroot: Well, you can easily unroot your device by installing the stock firmware. This will also remove custom recovery (like TWRP, CWM, Cyanogen, PhilZ, etc.), custom kernel, etc. stuff, as all partitions are installed with Samsung’s default respective images.
Steps to Be Followed
Step 1: Download and install device driver software on your computer.
As far as the cameras are concerned, the Samsung Galaxy J7 (2016) on the rear packs 13-megapixel camera. It sports a 5-megapixel camera on the front for selfies.
The Samsung Galaxy J7 (2016) runs TouchWiz UI is based on Android 6.0.1 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 128GB). The Samsung Galaxy J7 (2016) is a dual-SIM (GSM and GSM) mobile that accepts Micro-SIM and Micro-SIM cards. The Samsung Galaxy J7 (2016) measures 151.70 x 76.00 x 7.80mm (height x width x thickness) and weighs 170.00 grams. It was launched in Pink, White, and Gold colours.
Connectivity options on the Samsung Galaxy J7 (2016) include Wi-Fi 802.11 b/g/n, GPS, Bluetooth v4.10, USB OTG, Wi-Fi Direct, 3G, and 4G (with support for Band 40 used by some LTE networks in India). Sensors on the phone include accelerometer, ambient light sensor, and proximity sensor.
Pre-Requisites
This will work on Samsung Galaxy J7 2016 SM-J710F Binary 6 (Don’t Try this on Any other device).
Charge your phone up to 80% or 70%.
Download the latest Samsung USB Drivers.
You will lose all you data. So make sure to Backup your phone before doing this step .
You can also backup all your Data.
Download all the Zip files from below.
Before Start Update Firmware
Backup Apps and SMS messages, Contacts, Google Data, WhatsApp Messages Pictures and Videos.
Make sure your Android device is charged up to 60-70% battery level.
USB drivers installed for the Samsung Galaxy.
make sure model number (SM-J710F).
Download the Custom firmware or rom file in download section Samsung Galaxy J7 2016 SM-J710F.
Benefits of Stock Firmware
Back To Stock: If you wish to go back to stock on your Samsung device, simply installing a firmware using Odin will do it. Whatever customization you had done will be gone, like custom recovery, custom kernel, root access, etc. The device becomes as good as new software-wise.
Update: Installing firmware with a newer Android version or build no. is the easiest way to update your Samsung Galaxy device manually, without waiting for the OTA update, or when OTA fails you.
Unbrick: If your Galaxy device is not starting properly and is stuck in the boot loop situation and thus rebooting after should the logo, then installing a firmware will fix that too. It serves as a good fix for soft-bricked devices.
Unroot: Well, you can easily unroot your device by installing the stock firmware. This will also remove custom recovery (like TWRP, CWM, Cyanogen, PhilZ, etc.), custom kernel, etc. stuff, as all partitions are installed with Samsung’s default respective images.
Steps to Be Followed
Step 1: Download and install device driver software on your computer.
Download Samsung Galaxy J7 2016 SM-J710F official firmware in download section.
Download the driver software of your device. Download and then install it on you computer.
Download or update Kies, part of which will install or update drivers.
Once drivers are installed or updated, it is highly recommended that you restart your computer.
Step 2: Download and extract the Stock ROM (Official/Original Firmware).
After downloading it (normally a compressed file), you need to extact/unzip it to certain location of your PC. The file types that Odin uses are *.bin,*.tar and *.tar.md5.
Step 3: Download and extract Odin on you PC.
You can download Odin3_v3.14.1.zip directly from download section below is a fine alternative, it also offers a download link. Or you can always Google "Odin download".
After downloading it on your PC, extract it to Desktop or another location you'd prefer.
After extracting, right-click to "Open as Administrator". It may prevent certain issue from happening.
Step 4: Boot your Samsung device into Download mode.
Follow these steps to enter Download Mode/Odin Mode:
Power off your device
Press and hold Volume Down key, Home Button Key and Power Key
When your device vibrates, release Power key while keep holding the Volume Down key and Home Button key
Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)
Step 5: Connect your device to PC.
You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says "Added!" and in the meantime you should see a light-blue box at the ID:COM section stating "COM:3" (the number depend on which USB port you have plugged the device cable and is irrelevant).
Step 6: Click "AP" and "BL" and "CP" and "CSC" to add tar.md5 file that you have extracted and then "Start".
Whether it is "PDA" or "AP" depends on the version of Odin that you used. But the md5 file goes to either "PDA" or "AP" and same way for "BL", "CP" and "CSC".
After adding the file, click "Start" to begin the flashing process.
WARNING :
DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN.
When the flashing process is done and if everything goes well, you should see a big green box saying "RESET" or "PASSED" (depends on the version of Odin is used). By now, the device should be rebooted and it is safe to remove/unplug your device.
Download Official Rom For Samsung galaxy J7 2016 SM-J710F U6
Download the Official Samsung Galaxy J7 2016 SM-J710F official ROM package from the below download links. Transfer them to your device before proceeding with the installation process.
Odin3_v3.14.1.zip
Full Firmware J710FXXU6CSG2_J710FXXU6CSG2_8.1.0.zip
Decrypltion Key : RiSskpAmG4OaNdJecv6hlH09bwRKvyYs5Ti-Vz9vJy8
DISCLAIMER
All videos on my YouTube channel are for Educational purpose only and/or to help people unlock their phones who forget their Password or Google Lock. I do not endorse or encourage unlocking of stolen/barred mobile phones. Anyone using these videos for any illegal or unlawful purpose will be solely responsible for his/her activity.
Post a Comment