This is the official Android 4.4.4 Kitkat stock firmware/ROM (Flash file) for the Samsung Galaxy Tab E 9.6 WiFi SM-T560.
With this Samsung Galaxy Tab E 9.6 SM-T560 flash file / Firmware / stock rom you can fix stuck at samsung or logo and bootloop, fix dead mobile, fix IMEI related issues, any type of software issue, and battery draining, removing google account , frp, and downgrade or upgrade, root, flash stock rom.
Before five years, Samsung Galaxy Tab E 9.6 SM-T560 Tablets are very well known contrast with other tablets. Since the people who bought Tablets generally utilize that device for 4-5 years. After that tablets are slightly decreased. Samsung Galaxy Tab E 9.6, one of the popular mid-range tablet variations. It accompanies the KitKat Android, You can update Android utilizing the OTA method. Whenever you can't do the regular OTA, you can update your tablet to Android 4.4.4 Kitkat using the below manual method. Android 4.4.4 is the latest software update version available for SM-T560 Tablet. If you haven’t received the recent update version on your Galaxy Tab E 9.6 Wi-Fi Device, then you can go manually to check the software update setting.
Choosing right Stock firmware for Samsung SM-T560 android update is the Major advance in this process. pick the firmware SM-T560 android upgrade. It is a Manual ODIN process You can install latest android version available. If you utilize the sideload method, you should flash the following android version within the same model number of the ROM or probably the process may brick your device.
We recommend using Odin Tool to samsung Galaxy SM-T560 software update device. Use it only if you are 100% sure about the risks involved in flashing your device. we are not responsible for any damage caused by using the files on this TechNO Website.
The flash file for the Samsung Galaxy Tab E 9.6 WiFi SM-T560 Android Upgrade is necessary when you want to perform any of the following software-related tasks:
Upgrade/Update your Samsung Galaxy phone’s firmware.
Reinstall the stock ROM that was officially installed.
Unroot your Samsung Android device.
Fix software issues that cause your device OS(Operating System) and apps to hang or misbehave.
Fix unknown baseband error.
Fix Samsung devices that are in a boot loop like hanging on the Samsung logo or rebooting continually.
Use the firmware for Android development purposes.
Remove malware, virus, and spyware from your Samsung device and more.
Samsung Galaxy Tab E 9.6 SM-T560 Specifications
Samsung Galaxy Tab E Nook 9.6 tablet was launched in October 2015. The tablet comes with a 9.60-inch display with a resolution of 1280x800 pixels at a pixel density of 157 pixels per inch (ppi). Samsung Galaxy Tab E Nook 9.6 is powered by a 1.2GHz quad-core Qualcomm APQ8016 processor. It comes with 1.5GB of RAM. The Samsung Galaxy Tab E Nook 9.6 runs Android 5.1.1 and is powered by a 5000mAh non-removable battery.
As far as the cameras are concerned, the Samsung Galaxy Tab E Nook 9.6 on the rear packs 5-megapixel camera. It sports a 2-megapixel camera on the front for selfies.
Samsung Galaxy Tab E Nook 9.6 based on Android 5.1.1 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 128GB). The Samsung Galaxy Tab E Nook 9.6 measures 241.80 x 150.00 x 9.70mm (height x width x thickness) and weighs 547.00 grams.
Connectivity options on the Samsung Galaxy Tab E Nook 9.6 include Wi-Fi 802.11 a/b/g/n, GPS, and FM radio. Sensors on the tablet include accelerometer, ambient light sensor, and proximity sensor.
Samsung Galaxy Tab E 9.6 Firmware Benefits
You can use the firmware for a variety of purposes, which includes:
Unbrick your Galaxy Tab E 9.6 (SM-T560) if it’s bootlooping and stuck at logo when restarting.
Go Back to Stock on your Galaxy Tab E 9.6 SM-T560 helps when looking to sell the device, or fix installing OTA updates if broken.
Restore Galaxy Tab E 9.6 (SM-T560) to factory state.
Upgrade your Galaxy Tab E 9.6 (SM-T560) to newer Android version.
Downgrade your Galaxy Tab E 9.6 (SM-T560) to lower build no. at same Android version.
Unroot your Galaxy Tab E 9.6 (SM-T560).
Remove custom recovery like TWRP and CWM, if installed, on your Galaxy Tab E 9.6 (SM-T560).
Before Start Official Update Firmware Android 4.4.4 KitKat
Backup Apps and SMS messages, Contacts, Google Data, WhatsApp Messages Pictures and Videos.
Make sure your Android device is charged up to 60- 70% battery level.
USB Samsung drivers installed for the Samsung Galaxy or download kies.
Download Odin in download section and must be run as an Administrator.
Download the firmware or rom file in download section Samsung Galaxy Tab E 9.6 (WiFi) (SM-T560) ROM.
Decompress firmware and Odin Tool (use WinRAR or 7-zip).
How to Download the Correct Firmware File
This is an important part!
How to Flash Stock Firmware On Samsung Tab E 9.6 ?
First, read our disclaimer, then take backup and then follow the guide below to install the firmware.
Disclaimer:
Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and this you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device!
Your actions are at your risk, we are not responsible for everything, please backup your important data, read and follow the tutorial correctly.
Step-by-step Firmware Installation Guide
Step 3. Then press Volume up key and connect your device to PC using USB cable.
Samsung Galaxy Tab E 9.6 WIFI SM-T560 Stock Rom Firmware (Flash File)
Here are the links to the stock firmware/flash file for the Samsung Galaxy Tab E 9.6 WiFi SM-T560 Stock ROM Firmware(Flash File) with the latest Android version available.
Reinstall the stock ROM that was officially installed.
Unroot your Samsung Android device.
Fix software issues that cause your device OS(Operating System) and apps to hang or misbehave.
Fix unknown baseband error.
Fix Samsung devices that are in a boot loop like hanging on the Samsung logo or rebooting continually.
Use the firmware for Android development purposes.
Remove malware, virus, and spyware from your Samsung device and more.
Samsung Galaxy Tab E 9.6 SM-T560 Specifications
Samsung Galaxy Tab E Nook 9.6 tablet was launched in October 2015. The tablet comes with a 9.60-inch display with a resolution of 1280x800 pixels at a pixel density of 157 pixels per inch (ppi). Samsung Galaxy Tab E Nook 9.6 is powered by a 1.2GHz quad-core Qualcomm APQ8016 processor. It comes with 1.5GB of RAM. The Samsung Galaxy Tab E Nook 9.6 runs Android 5.1.1 and is powered by a 5000mAh non-removable battery.
As far as the cameras are concerned, the Samsung Galaxy Tab E Nook 9.6 on the rear packs 5-megapixel camera. It sports a 2-megapixel camera on the front for selfies.
Samsung Galaxy Tab E Nook 9.6 based on Android 5.1.1 and packs 16GB of inbuilt storage that can be expanded via microSD card (up to 128GB). The Samsung Galaxy Tab E Nook 9.6 measures 241.80 x 150.00 x 9.70mm (height x width x thickness) and weighs 547.00 grams.
Connectivity options on the Samsung Galaxy Tab E Nook 9.6 include Wi-Fi 802.11 a/b/g/n, GPS, and FM radio. Sensors on the tablet include accelerometer, ambient light sensor, and proximity sensor.
You can use the firmware for a variety of purposes, which includes:
Fix your Galaxy Tab E 9.6 (SM-T560) if it’s giving you force closes errors and restarts randomly.
Unbrick your Galaxy Tab E 9.6 (SM-T560) if it’s bootlooping and stuck at logo when restarting.
Go Back to Stock on your Galaxy Tab E 9.6 SM-T560 helps when looking to sell the device, or fix installing OTA updates if broken.
Restore Galaxy Tab E 9.6 (SM-T560) to factory state.
Upgrade your Galaxy Tab E 9.6 (SM-T560) to newer Android version.
Downgrade your Galaxy Tab E 9.6 (SM-T560) to lower build no. at same Android version.
Unroot your Galaxy Tab E 9.6 (SM-T560).
Remove custom recovery like TWRP and CWM, if installed, on your Galaxy Tab E 9.6 (SM-T560).
Before Start Official Update Firmware Android 4.4.4 KitKat
Backup Apps and SMS messages, Contacts, Google Data, WhatsApp Messages Pictures and Videos.
Make sure your Android device is charged up to 60- 70% battery level.
USB Samsung drivers installed for the Samsung Galaxy or download kies.
Make sure model number (SM-T560).
Download Odin in download section and must be run as an Administrator.
Download the firmware or rom file in download section Samsung Galaxy Tab E 9.6 (WiFi) (SM-T560) ROM.
Decompress firmware and Odin Tool (use WinRAR or 7-zip).
How to Download the Correct Firmware File
This is an important part!
Be sure to check and find the correct model no. of your Galaxy Tab E 9.6 (SM-T560).
You can identify the model number check it on its packaging box, or under Settings > About. Another solid trick would be to look at the packaging box of your device (in case you can’t power on the device because it is bricked).
Now that you know the model number download the latest firmware below in download section.
Next, install the firmware on your Galaxy Tab E 9.6 SM-T560 android update by following the guide right below.How to Flash Stock Firmware On Samsung Tab E 9.6 ?
First, read our disclaimer, then take backup and then follow the guide below to install the firmware.
Disclaimer:
Installing an official firmware through Odin doesn’t void your device’s warranty, but it remains an unofficial process and this you need to be cautious of it. In any case, you only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup! Create an appropriate backup of contacts, pictures, videos, songs and other important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have a backup of all your important files. Sometimes, firmware installation may delete everything on your device!
Your actions are at your risk, we are not responsible for everything, please backup your important data, read and follow the tutorial correctly.
Step-by-step Firmware Installation Guide
Step 1. First, download to your PC, Odin tool latest version, Firmware, Samsung Kies and USB Samsung Drivers.
Step 2. Next turn off your device and then press and hold the Volume down key , Power button and Home key.
Step 3. Then press Volume up key and connect your device to PC using USB cable.
Step 4. Then open Odin3.
Step 5. Next select the order of the files for the firmware: AP.
Step 6. Finally click Start.
Step 7. That’s all! Within a few minutes, the latest Stock Firmware update will be installed on your phone.
Here are the links to the stock firmware/flash file for the Samsung Galaxy Tab E 9.6 WiFi SM-T560 Stock ROM Firmware(Flash File) with the latest Android version available.
Odin3_v3.14.1.zip
T560XXU0APL1_T560OJV0APK4_MID.zip
Samsung Galaxy Tab E 9.6 Lineage OS 11 (SM-T560) | Install Custom ROM Android 4.4.4 KitKat
DISCLAIMER
All videos on my YouTube channel are for Educational purpose only and/or to help people unlock their phones who forget their Password or Google Lock. I do not endorse or encourage unlocking of stolen/barred mobile phones. Anyone using these videos for any illegal or unlawful purpose will be solely responsible for his/her activity.
Post a Comment